Name: IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical
Brand: Sinuo Testing Equipment Co. , Limited
SKU: SN441-1000L
Availability: InStock

MOQ:	1
prezzo:	Customized
Imballaggio standard:	custodia in compensato
Periodo di consegna:	30 giorni
Metodo di pagamento:	T/T
Capacità di approvvigionamento:	10 set al mese

Informazione dettagliata

Descrizione del prodotto

Informazione dettagliata

Luogo di origine

Cina

Marca

Sinuo

Certificazione

Calibration Certificate (Cost Additional)

Numero di modello

SN441-1000L

Dimensione interna della camera:

600 × 600 × 600 mm (L×L×A)

Dimensioni esterne:

850 × 1050 × 1800 mm (L×L×A)

Tipo di polvere:

Polvere fine ≤ 75 μm

Apertura in rete metallica:

50 μm

Concentrazione in polvere:

2 kg/m³

Velocità del flusso d'aria:

≤ 2 m/s

Gamma di misuratori del flusso d'aria:

1 – 20 l/min

Dosaggio di polvere di talco:

2 – 5 kg/m³

Descrizione del prodotto

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical

Product Overview:

The Sand and Dust Test Chamber is specially designed to evaluate the resistance of electrical and electronic products, automotive and motorcycle components, and sealing parts against the ingress of sand and fine dust particles.

By simulating harsh sand and dust airflow conditions caused by natural environments or mechanical disturbances such as vehicle movement, this chamber helps assess the potential damaging effects of airborne particles on product enclosures, seals, and internal components during operation, storage, and transportation.

The test results provide reliable data for product design validation, quality control, and compliance with international ingress protection requirements.

Applicable Standards:

IEC 60529 – IP5X & IP6X (Figure 2)

IEC 60598-1:2008

IEC 60335-1 Clause 22.1

Other relevant international standards

Applications:

Electrical and electronic products

Automotive and motorcycle parts

Enclosures, housings, and sealing components

Dust-proof and ingress protection performance verification

Key Features:

Accurate simulation of sand and dust airflow environments

Adjustable negative pressure for enclosure protection testing

Uniform dust circulation and controlled dust concentration

PLC controller with touch screen for intuitive operation

Designed for long-duration and cyclic testing requirements

Technical Specifications:

Category	Parameter	Specification
General	Model	SN441-216L
	Inner chamber size	600 × 600 × 600 mm (L×W×H)
	Outer dimensions	850 × 1050 × 1800 mm (L×W×H)
	Load capacity	10 kg
Dust Characteristics	Dust type	Fine dust ≤ 75 μm
	Metal mesh aperture	50 μm
	Nominal line spacing	≤ 75 μm
	Dust concentration	2 kg/m³
	Talcum powder dosage	2 – 5 kg/m³
Airflow System	Airflow velocity	≤ 2 m/s
	Dust blowing direction	Vertical circulation (top to bottom)
	Circulation fan	Low-noise centrifugal fan with closed alloy motor
	Airflow meter range	1 – 20 L/min
Pressure & Vacuum	Negative pressure range	Adjustable from –10 kPa to 0 kPa
	Preset pressure levels	–2 kPa / –5 kPa / –10 kPa
	Vacuum system	Vacuum pump, pressure regulating valve, nozzle, piping
Temperature Control	Dust heating temperature	Ambient +10°C to 60°C
	Heating method	Stainless steel mica heating sleeve
Timing Functions	Dust blowing time	1 s – 99 h (adjustable)
	Test duration	1 s – 99 h (adjustable)
	Vacuum time	1 s – 99 h (adjustable)
	Dust blowing cycle	1 s – 99 h (adjustable)
	Preset test time	0.1 h – 9999.9 h
Control System	Controller	PLC + touch screen
	Control functions	Continuous / cyclic operation, time preset
	Sample power socket	Dust-proof socket AC 220V, 16A
Chamber Construction	Inner chamber material	SUS201 mirror-finished stainless steel
	Outer chamber material	A3 steel plate with electrostatic coating
	Observation window	1 pc
	Lighting lamp	1 pc
Structure	Main components	Test chamber, dust circulation unit, vacuum system, heating system, flow valves, protective screen
Power Supply	Power supply	AC 380V, 3-phase, 5-wire, 50 Hz
	Rated power	3 kW (no load)
	Recommended air switch	Independent 32A with terminal blocks
	Power cable requirement	≥ 4 mm²
Operating Environment	Ambient temperature	23 ± 5°C
	Relative humidity	25% – 70% RH
	Atmospheric pressure	86 – 106 kPa
Safety Protection	Safety devices	Phase sequence protection, leakage protection

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical 0

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical 1

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical 2

Tag:

prodotti

MOQ:	1
prezzo:	Customized
Imballaggio standard:	custodia in compensato
Periodo di consegna:	30 giorni
Metodo di pagamento:	T/T
Capacità di approvvigionamento:	10 set al mese

Informazione dettagliata

Descrizione del prodotto

Informazione dettagliata

Luogo di origine

Cina

Marca

Sinuo

Certificazione

Calibration Certificate (Cost Additional)

Numero di modello

SN441-1000L

Dimensione interna della camera:

600 × 600 × 600 mm (L×L×A)

Dimensioni esterne:

850 × 1050 × 1800 mm (L×L×A)

Tipo di polvere:

Polvere fine ≤ 75 μm

Apertura in rete metallica:

50 μm

Concentrazione in polvere:

2 kg/m³

Velocità del flusso d'aria:

≤ 2 m/s

Gamma di misuratori del flusso d'aria:

1 – 20 l/min

Dosaggio di polvere di talco:

2 – 5 kg/m³

Quantità di ordine minimo:

Prezzo:

Customized

Imballaggi particolari:

custodia in compensato

Tempi di consegna:

30 giorni

Termini di pagamento:

T/T

Capacità di alimentazione:

10 set al mese

Descrizione del prodotto

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical

Product Overview:

The test results provide reliable data for product design validation, quality control, and compliance with international ingress protection requirements.

Applicable Standards:

IEC 60529 – IP5X & IP6X (Figure 2)

IEC 60598-1:2008

IEC 60335-1 Clause 22.1

Other relevant international standards

Applications:

Electrical and electronic products

Automotive and motorcycle parts

Enclosures, housings, and sealing components

Dust-proof and ingress protection performance verification

Key Features:

Accurate simulation of sand and dust airflow environments

Adjustable negative pressure for enclosure protection testing

Uniform dust circulation and controlled dust concentration

PLC controller with touch screen for intuitive operation

Designed for long-duration and cyclic testing requirements

Technical Specifications:

Category	Parameter	Specification
General	Model	SN441-216L
	Inner chamber size	600 × 600 × 600 mm (L×W×H)
	Outer dimensions	850 × 1050 × 1800 mm (L×W×H)
	Load capacity	10 kg
Dust Characteristics	Dust type	Fine dust ≤ 75 μm
	Metal mesh aperture	50 μm
	Nominal line spacing	≤ 75 μm
	Dust concentration	2 kg/m³
	Talcum powder dosage	2 – 5 kg/m³
Airflow System	Airflow velocity	≤ 2 m/s
	Dust blowing direction	Vertical circulation (top to bottom)
	Circulation fan	Low-noise centrifugal fan with closed alloy motor
	Airflow meter range	1 – 20 L/min
Pressure & Vacuum	Negative pressure range	Adjustable from –10 kPa to 0 kPa
	Preset pressure levels	–2 kPa / –5 kPa / –10 kPa
	Vacuum system	Vacuum pump, pressure regulating valve, nozzle, piping
Temperature Control	Dust heating temperature	Ambient +10°C to 60°C
	Heating method	Stainless steel mica heating sleeve
Timing Functions	Dust blowing time	1 s – 99 h (adjustable)
	Test duration	1 s – 99 h (adjustable)
	Vacuum time	1 s – 99 h (adjustable)
	Dust blowing cycle	1 s – 99 h (adjustable)
	Preset test time	0.1 h – 9999.9 h
Control System	Controller	PLC + touch screen
	Control functions	Continuous / cyclic operation, time preset
	Sample power socket	Dust-proof socket AC 220V, 16A
Chamber Construction	Inner chamber material	SUS201 mirror-finished stainless steel
	Outer chamber material	A3 steel plate with electrostatic coating
	Observation window	1 pc
	Lighting lamp	1 pc
Structure	Main components	Test chamber, dust circulation unit, vacuum system, heating system, flow valves, protective screen
Power Supply	Power supply	AC 380V, 3-phase, 5-wire, 50 Hz
	Rated power	3 kW (no load)
	Recommended air switch	Independent 32A with terminal blocks
	Power cable requirement	≥ 4 mm²
Operating Environment	Ambient temperature	23 ± 5°C
	Relative humidity	25% – 70% RH
	Atmospheric pressure	86 – 106 kPa
Safety Protection	Safety devices	Phase sequence protection, leakage protection

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical 0

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical 1

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical 2

Tag:

Apparecchiatura di collaudo degli apparecchi elettrici

Laboratorio di rendimento energetico

Apparecchiatura di collaudo del veicolo

Apparecchiatura di collaudo della batteria

commuti il tester di vita

Apparecchiatura di collaudo del LED

apparecchiatura di collaudo dell'ingresso dell'acqua

Camera Test ambientali

Camera di prova di infiammabilità

Macchina per test MCB

Apparecchiature per la prova di dispositivi medici

Attrezzatura di prova di IEC 62368

Apparecchiatura di prova per laboratorio elettrico

IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical

camera di prova dei ess,

camere ambientali di simulazione,

Camera di temperatura costante

Camera a temperatura e umidità costanti per la prova di affidabilità

Camera di prova polvere da 2 m³ IP5X e IP6X per test in ambienti con sabbia secca o polvere in circolazione

Camera di circolazione ad alta precisione del forno per la prova di invecchiamento della gomma

Bagno ad acqua per la prova di cavi in PVC con controllo della temperatura digitale e pompa circolatrice

IEC 60068-2-1 Camera di prova programmabile per la temperatura e l'umidità 1800L Temperatura -40 °C ~ +150 °C

960L Camera di prova di temperatura e umidità Camera climatica a doppia porta per la prova dell'illuminazione

Camera di prova ad alta bassa temperatura e bassa pressione da -40°C a +70°C 5kPa

Apparecchiatura di collaudo degli apparecchi elettrici

Laboratorio di rendimento energetico

Apparecchiatura di collaudo del veicolo

Apparecchiatura di collaudo della batteria

commuti il tester di vita

Apparecchiatura di collaudo del LED

apparecchiatura di collaudo dell'ingresso dell'acqua

Camera Test ambientali

Camera di prova di infiammabilità

Macchina per test MCB

Apparecchiature per la prova di dispositivi medici

Attrezzatura di prova di IEC 62368

Apparecchiatura di prova per laboratorio elettrico

camera di prova dei ess,

camere ambientali di simulazione,

Camera di temperatura costante